Embedded System Development Board (8051)
The ESD-8051 board represents the embedded system consisting
of the hardware and the software embedded in it.
Based on the microcontroller and is designed to carry out specific
computations in the embedded system.
It is smaller in the size and faster to load.
It is more specific to one task ,and thus easy to manage.
The Embedded System Development Board (8051) represents the embedded system consisting of the hardware and the software embedded in it. It is based on microcontroller and is design to carry out specific computations in the embedded system. The microcontroller 8051 is designed by the Intel MOS-51. An Embedded system consists of processor, memory, power supply with the external interfaces which plug in on a card. It is smaller in the size and faster to load.
If you want to buy this product Click Here .
Features of Embedded System Development Board (8051) :
About the Microcontroller:
8051-based CMOS microcontroller with 6-clock high-speed core.
20Mhz at 6clks/cycle, 40Mhz at 12clks/cycle.
256 B RAM, 8Kb ISP flash with 2kb LD ROM (Boot loader).
Up to 36 i/o pins.
Interrupt system with 8 sources and 4 priority levels.
3 16-bit timer/counters, 1 watchdog timer.
1 full-duplex UART ,1 power management unit.
No need to buy a separate programmer.
Program through USB.
Onboard peripherals for rapid prototyping:
4 general purpose LEDs.
2 push buttons can be used for general purpose, interrupts and counter.
7-15 volt input through DC jack and output for interfacing high voltage components like motors.
3.3 volt output for interfacing various sensors and communications modules which can work only on 3.3V.
Connectors for Bluetooth module and LCD.
32 GPIO pins.
Slide-switch for switching between programming and normal UART operation.